dmesg - Sun Fire X4170 - 2 x Xeon E5540
Linux version 4.10.0-28-generic (buildd@lgw01-12) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:48 UTC 2017 (Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable
BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f77ffff] usable
BIOS-e820: [mem 0x000000007f78e000-0x000000007f78ffff] type 9
BIOS-e820: [mem 0x000000007f790000-0x000000007f79dfff] ACPI data
BIOS-e820: [mem 0x000000007f79e000-0x000000007f7cffff] ACPI NVS
BIOS-e820: [mem 0x000000007f7d0000-0x000000007f7dffff] reserved
BIOS-e820: [mem 0x000000007f7ec000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000097fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: SUN MICROSYSTEMS SUN FIRE X4170 SERVER /ASSY,MOTHERBOARD,X4170, BIOS 07060310 11/26/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x980000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-E7FFF write-protect
E8000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask F800000000 write-back
1 base 0800000000 mask FF00000000 write-back
2 base 0900000000 mask FF80000000 write-back
3 base 0080000000 mask FF80000000 uncachable
4 base 007F800000 mask FFFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 36856M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0x7f800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff920c800ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff920c80094000] 94000 size 24576
BRK [0x8c3428000, 0x8c3428fff] PGTABLE
BRK [0x8c3429000, 0x8c3429fff] PGTABLE
BRK [0x8c342a000, 0x8c342afff] PGTABLE
BRK [0x8c342b000, 0x8c342bfff] PGTABLE
BRK [0x8c342c000, 0x8c342cfff] PGTABLE
BRK [0x8c342d000, 0x8c342dfff] PGTABLE
BRK [0x8c342e000, 0x8c342efff] PGTABLE
RAMDISK: [mem 0x3302c000-0x3580dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FA490 000024 (v02 SUN )
ACPI: XSDT 0x000000007F790100 000094 (v01 SUN Xxx70 20131126 MSFT 00000097)
ACPI: FACP 0x000000007F790290 0000F4 (v04 SUN Xxx70 20131126 MSFT 00000097)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20160930/tbfadt-603)
ACPI: DSDT 0x000000007F790580 005AA5 (v02 SUN Xxx70 00000002 INTL 20051117)
ACPI: FACS 0x000000007F79E000 000040
ACPI: FACS 0x000000007F79E000 000040
ACPI: APIC 0x000000007F790390 0000DE (v02 SUN Xxx70 20131126 MSFT 00000097)
ACPI: MCFG 0x000000007F7904C0 00003C (v01 SUN Xxx70 20131126 MSFT 00000097)
ACPI: SLIT 0x000000007F790500 000030 (v01 SUN Xxx70 20131126 MSFT 00000097)
ACPI: SPMI 0x000000007F790530 000041 (v05 SUN Xxx70 20131126 MSFT 00000097)
ACPI: OEMB 0x000000007F79E040 0000B5 (v01 SUN Xxx70 20131126 MSFT 00000097)
ACPI: HPET 0x000000007F79A580 000038 (v01 SUN Xxx70 20131126 MSFT 00000097)
ACPI: DMAR 0x000000007F79E100 000120 (v01 SUN Xxx70 00000001 MSFT 00000097)
ACPI: SRAT 0x000000007F79A5C0 0001D0 (v01 SUN Xxx70 00000001 INTC 00000001)
ACPI: SSDT 0x000000007F7A3360 00249F (v01 SUN Xxx70 00000012 INTL 20051117)
ACPI: EINJ 0x000000007F79A790 000130 (v01 SUN Xxx70 20131126 MSFT 00000097)
ACPI: BERT 0x000000007F79A920 000030 (v01 SUN Xxx70 20131126 MSFT 00000097)
ACPI: ERST 0x000000007F79A950 0001B0 (v01 SUN Xxx70 20131126 MSFT 00000097)
ACPI: HEST 0x000000007F79AB00 0000A8 (v01 SUN Xxx70 20131126 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 1 -> APIC 0x10 -> Node 1
SRAT: PXM 1 -> APIC 0x11 -> Node 1
SRAT: PXM 1 -> APIC 0x12 -> Node 1
SRAT: PXM 1 -> APIC 0x13 -> Node 1
SRAT: PXM 1 -> APIC 0x14 -> Node 1
SRAT: PXM 1 -> APIC 0x15 -> Node 1
SRAT: PXM 1 -> APIC 0x16 -> Node 1
SRAT: PXM 1 -> APIC 0x17 -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x4ffffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x500000000-0x97fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x7fffffff] -> [mem 0x00000000-0x7fffffff]
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x4ffffffff] -> [mem 0x00000000-0x4ffffffff]
NODE_DATA(0) allocated [mem 0x4fffd5000-0x4ffffffff]
NODE_DATA(1) allocated [mem 0x97ffb3000-0x97ffddfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000097fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000099fff]
node 0: [mem 0x0000000000100000-0x000000007f77ffff]
node 0: [mem 0x0000000100000000-0x00000004ffffffff]
node 1: [mem 0x0000000500000000-0x000000097fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004ffffffff]
On node 0 totalpages: 4716313
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 8094 pages used for memmap
DMA32 zone: 518016 pages, LIFO batch:31
Normal zone: 65536 pages used for memmap
Normal zone: 4194304 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000000500000000-0x000000097fffffff]
On node 1 totalpages: 4718592
Normal zone: 73728 pages used for memmap
Normal zone: 4718592 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7f780000-0x7f78dfff]
PM: Registered nosave memory: [mem 0x7f78e000-0x7f78ffff]
PM: Registered nosave memory: [mem 0x7f790000-0x7f79dfff]
PM: Registered nosave memory: [mem 0x7f79e000-0x7f7cffff]
PM: Registered nosave memory: [mem 0x7f7d0000-0x7f7dffff]
PM: Registered nosave memory: [mem 0x7f7e0000-0x7f7ebfff]
PM: Registered nosave memory: [mem 0x7f7ec000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2
percpu: Embedded 36 pages/cpu @ffff92116dc00000 s107992 r8192 d31272 u262144
pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 08 09 10 11 [1] 04 05 06 07 12 13 14 15
Built 2 zonelists in Node order, mobility grouping on. Total pages: 9287462
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 37019372K/37739620K available (9060K kernel code, 1666K rwdata, 3824K rodata, 2228K init, 2364K bss, 720248K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:524544 nr_irqs:960 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2527.189 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.37 BogoMIPS (lpj=10108756)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34206 entries in 134 pages
smpboot: Max logical packages: 4
DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
APIC calibration not consistent with PM-Timer: 155ms instead of 100ms
APIC delta adjusted to PM-Timer: 831248 (1296738)
smpboot: CPU0: Intel(R) Xeon(R) CPU E5540 @ 2.53GHz (family: 0x6, model: 0x1a, stepping: 0x5)
Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
core: CPU erratum AAJ80 worked around
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
.... node #1, CPUs: #4 #5 #6 #7
.... node #0, CPUs: #8 #9 #10 #11
.... node #1, CPUs: #12 #13 #14 #15
smp: Brought up 2 nodes, 16 CPUs
smpboot: Total of 16 processors activated (80870.04 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7f79e000-0x7f7cffff] (204800 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 21:24:39, date: 08/22/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A072000 00043B (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9215E9A78000 0003D1 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A0D8800 000446 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A0C7E00 000085 (v01 PmRef P002Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A119800 000446 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A10E9C0 000085 (v01 PmRef P003Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A156000 000446 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A14F680 000085 (v01 PmRef P004Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9215E99A5000 000444 (v01 DpgPmm P005Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A391200 000085 (v01 PmRef P005Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A036800 000444 (v01 DpgPmm P006Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A02AE40 000085 (v01 PmRef P006Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A0DE000 000444 (v01 DpgPmm P007Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A10F440 000085 (v01 PmRef P007Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A1A1800 000444 (v01 DpgPmm P008Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A187200 000085 (v01 PmRef P008Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A7F6000 000448 (v01 DpgPmm P009Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A009D40 000085 (v01 PmRef P009Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A077000 000448 (v01 DpgPmm P010Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A0815C0 000085 (v01 PmRef P010Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A11C000 000448 (v01 DpgPmm P011Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A14FBC0 000085 (v01 PmRef P011Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A1A2800 000448 (v01 DpgPmm P012Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A187140 000085 (v01 PmRef P012Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9215E99A1000 000446 (v01 DpgPmm P013Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A3918C0 000085 (v01 PmRef P013Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A7F6800 000446 (v01 DpgPmm P014Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A009680 000085 (v01 PmRef P014Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A035000 000446 (v01 DpgPmm P015Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A0806C0 000085 (v01 PmRef P015Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A0DF800 000446 (v01 DpgPmm P016Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92116A0C6480 000085 (v01 PmRef P016Cst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000cc000-0x000d1dff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0a7f window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 0x10: [mem 0xfec8a000-0xfec8afff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
pci 0000:00:16.0: reg 0x10: [mem 0xfa9e0000-0xfa9e3fff 64bit]
pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
pci 0000:00:16.1: reg 0x10: [mem 0xfa9e4000-0xfa9e7fff 64bit]
pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
pci 0000:00:16.2: reg 0x10: [mem 0xfa9e8000-0xfa9ebfff 64bit]
pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
pci 0000:00:16.3: reg 0x10: [mem 0xfa9ec000-0xfa9effff 64bit]
pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
pci 0000:00:16.4: reg 0x10: [mem 0xfa9f0000-0xfa9f3fff 64bit]
pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
pci 0000:00:16.5: reg 0x10: [mem 0xfa9f4000-0xfa9f7fff 64bit]
pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
pci 0000:00:16.6: reg 0x10: [mem 0xfa9f8000-0xfa9fbfff 64bit]
pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
pci 0000:00:16.7: reg 0x10: [mem 0xfa9fc000-0xfa9fffff 64bit]
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfa9de000-0xfa9de3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfa9dc000-0xfa9dc3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000f)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfa9d8000-0xfa9d87ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfa9da000-0xfa9da0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:01:00.0: [8086:10a7] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xfaa60000-0xfaa7ffff]
pci 0000:01:00.0: reg 0x14: [mem 0xfaa40000-0xfaa5ffff]
pci 0000:01:00.0: reg 0x18: [io 0xb880-0xb89f]
pci 0000:01:00.0: reg 0x1c: [mem 0xfaab8000-0xfaabbfff]
pci 0000:01:00.0: reg 0x30: [mem 0xfaa20000-0xfaa3ffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [8086:10a7] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0xfaae0000-0xfaafffff]
pci 0000:01:00.1: reg 0x14: [mem 0xfaac0000-0xfaadffff]
pci 0000:01:00.1: reg 0x18: [io 0xbc00-0xbc1f]
pci 0000:01:00.1: reg 0x1c: [mem 0xfaabc000-0xfaabffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfaa80000-0xfaa9ffff pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfaa00000-0xfaafffff]
pci 0000:07:00.0: [8086:10a7] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xfab60000-0xfab7ffff]
pci 0000:07:00.0: reg 0x14: [mem 0xfab40000-0xfab5ffff]
pci 0000:07:00.0: reg 0x18: [io 0xc880-0xc89f]
pci 0000:07:00.0: reg 0x1c: [mem 0xfabb8000-0xfabbbfff]
pci 0000:07:00.0: reg 0x30: [mem 0xfab20000-0xfab3ffff pref]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.1: [8086:10a7] type 00 class 0x020000
pci 0000:07:00.1: reg 0x10: [mem 0xfabe0000-0xfabfffff]
pci 0000:07:00.1: reg 0x14: [mem 0xfabc0000-0xfabdffff]
pci 0000:07:00.1: reg 0x18: [io 0xcc00-0xcc1f]
pci 0000:07:00.1: reg 0x1c: [mem 0xfabbc000-0xfabbffff]
pci 0000:07:00.1: reg 0x30: [mem 0xfab80000-0xfab9ffff pref]
pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 07-0c]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfab00000-0xfabfffff]
pci 0000:0d:00.0: [1000:0058] type 00 class 0x010000
pci 0000:0d:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:0d:00.0: reg 0x14: [mem 0xfaffc000-0xfaffffff 64bit]
pci 0000:0d:00.0: reg 0x1c: [mem 0xfafe0000-0xfafeffff 64bit]
pci 0000:0d:00.0: reg 0x30: [mem 0xfac00000-0xfadfffff pref]
pci 0000:0d:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 0d-12]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfac00000-0xfaffffff]
pci 0000:00:07.0: PCI bridge to [bus 13-18]
pci 0000:00:09.0: PCI bridge to [bus 19-1e]
pci 0000:1f:05.0: [1a03:2000] type 00 class 0x030000
pci 0000:1f:05.0: reg 0x10: [mem 0xfb000000-0xfb7fffff]
pci 0000:1f:05.0: reg 0x14: [mem 0xfbee0000-0xfbefffff]
pci 0000:1f:05.0: reg 0x18: [io 0xec00-0xec7f]
pci 0000:1f:05.0: supports D1 D2
pci 0000:1f:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 1f] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfbefffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0a7f window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:1f:05.0: vgaarb: setting as boot VGA device
pci 0000:1f:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:1f:05.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:ff:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f780000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0500-0x057f] could not be reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:02: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xffc00000-0xffefffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0400-0x041f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfaa00000-0xfaafffff]
pci 0000:00:02.0: PCI bridge to [bus 07-0c]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfab00000-0xfabfffff]
pci 0000:00:03.0: PCI bridge to [bus 0d-12]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfac00000-0xfaffffff]
pci 0000:00:07.0: PCI bridge to [bus 13-18]
pci 0000:00:09.0: PCI bridge to [bus 19-1e]
pci 0000:00:1e.0: PCI bridge to [bus 1f]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfbefffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0a7f window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xfaa00000-0xfaafffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfab00000-0xfabfffff]
pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0d: resource 1 [mem 0xfac00000-0xfaffffff]
pci_bus 0000:1f: resource 0 [io 0xe000-0xefff]
pci_bus 0000:1f: resource 1 [mem 0xfb000000-0xfbefffff]
pci_bus 0000:1f: resource 4 [io 0x0000-0x0a7f window]
pci_bus 0000:1f: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:1f: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:1f: resource 7 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:1f: resource 8 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Disabling L0s
pci 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
pci 0000:01:00.1: Disabling L0s
pci 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
pci 0000:07:00.0: Disabling L0s
pci 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
pci 0000:07:00.1: Disabling L0s
pci 0000:07:00.1: can't disable ASPM; OS doesn't have ASPM control
pci 0000:1f:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 256 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 40840K
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f02076
DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff
DMAR: RMRR base: 0x0000007f7ec000 end: 0x0000007f7fffff
DMAR: ATSR flags: 0x0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7b780000-0x7f780000] (64MB) mapped at [ffff920cfb780000-ffff920cff77ffff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1503437082.900:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: AER enabled with IRQ 24
pcieport 0000:00:02.0: AER enabled with IRQ 25
pcieport 0000:00:03.0: AER enabled with IRQ 26
pcieport 0000:00:07.0: AER enabled with IRQ 27
pcieport 0000:00:09.0: AER enabled with IRQ 28
pcieport 0000:00:01.0: Signaling PME with IRQ 24
pcieport 0000:00:02.0: Signaling PME with IRQ 25
pcieport 0000:00:03.0: Signaling PME with IRQ 26
pcieport 0000:00:07.0: Signaling PME with IRQ 27
pcieport 0000:00:09.0: Signaling PME with IRQ 28
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfb000000, mapped to 0xffff9d3487800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Failed to get Error Log Address Range.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfa9de000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-28-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfa9dc000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-28-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x106a5, pf=0x1, revision=0x11
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 1dbff672f4e4d459849c8aa71c01089bd04bfcdd'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
BERT: Can't request iomem region .
Magic number: 13:269:450
machinecheck: hash matches
rtc_cmos 00:01: setting system clock to 2017-08-22 21:24:44 UTC (1503437084)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1164K
Freeing unused kernel memory: 272K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
dca service started, version 1.12.1
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[drm] Initialized
[drm] Using P2A bridge for configuration
[drm] AST 2100 detected
[drm] Analog VGA only
[drm] dram MCLK=266 Mhz type=2 bus_width=32 size=00800000
[TTM] Zone kernel: Available graphics memory: 18531954 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfa9d8000 port 0xfa9d8100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xfa9d8000 port 0xfa9d8180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xfa9d8000 port 0xfa9d8200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xfa9d8000 port 0xfa9d8280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xfa9d8000 port 0xfa9d8300 irq 40
ata6: SATA max UDMA/133 abar m2048@0xfa9d8000 port 0xfa9d8380 irq 40
checking generic (fb000000 500000) vs hw (fb000000 800000)
fb: switching to astdrmfb from VESA VGA
Console: switching to colour dummy device 80x25
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x75
ast 0000:1f:05.0: fb0: astdrmfb frame buffer device
[drm] Initialized ast 0.1.0 20120228 for 0000:1f:05.0 on minor 0
usb 1-3: new high-speed USB device number 2 using ehci-pci
usb 2-3: new high-speed USB device number 2 using ehci-pci
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x2) 00:21:28:6b:03:ac
igb 0000:01:00.0: eth0: PBA No: Unknown
igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 1-3: New USB device found, idVendor=046b, idProduct=ff01
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Generic Hub
usb 1-3: Manufacturer: American Megatrends Inc.
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
usb 2-3: New USB device found, idVendor=04b4, idProduct=6560
usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
random: fast init done
ata1: SATA link down (SStatus 0 SControl 300)
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x2) 00:21:28:6b:03:ad
igb 0000:01:00.1: eth1: PBA No: Unknown
igb 0000:01:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 2-4: new high-speed USB device number 3 using ehci-pci
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth2: (PCIe:2.5Gb/s:Width x2) 00:21:28:6b:03:ae
igb 0000:07:00.0: eth2: PBA No: Unknown
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 5-1: new low-speed USB device number 2 using uhci_hcd
usb 2-4: New USB device found, idVendor=1a40, idProduct=0101
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB 2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.1: eth3: (PCIe:2.5Gb/s:Width x2) 00:21:28:6b:03:af
igb 0000:07:00.1: eth3: PBA No: Unknown
igb 0000:07:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:01:00.1 enp1s0f1: renamed from eth1
usb 5-1: New USB device found, idVendor=046b, idProduct=ff10
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Virtual Keyboard and Mouse
usb 5-1: Manufacturer: American Megatrends Inc.
igb 0000:01:00.0 enp1s0f0: renamed from eth0
hidraw: raw HID events driver (C) Jiri Kosina
tsc: Refined TSC clocksource calibration: 2526.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdab5d1d, max_idle_ns: 440795263955 ns
igb 0000:07:00.1 enp7s0f1: renamed from eth3
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:046B:FF10.0001/input/input2
hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/0003:046B:FF10.0002/input/input3
hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input1
igb 0000:07:00.0 enp7s0f0: renamed from eth2
usb 8-1: new full-speed USB device number 2 using uhci_hcd
ioc0: LSISAS1068E B2: Capabilities={Initiator}
ata3: SATA link down (SStatus 0 SControl 300)
usb 8-1: New USB device found, idVendor=0403, idProduct=6001
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: FT232R USB UART
usb 8-1: Manufacturer: FTDI
usb 8-1: SerialNumber: A800fq8V
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-4.1: new full-speed USB device number 5 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-4.1: New USB device found, idVendor=1532, idProduct=0007
usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4.1: Product: DeathAdder
usb 2-4.1: Manufacturer: Razer
input: Razer DeathAdder as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1:1.0/0003:1532:0007.0003/input/input4
hid-generic 0003:1532:0007.0003: input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1d.7-4.1/input0
usb 2-4.2: new low-speed USB device number 6 using ehci-pci
clocksource: Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
usb 2-4.2: New USB device found, idVendor=04f2, idProduct=0833
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4.2: Product: USB Keyboard
usb 2-4.2: Manufacturer: CHICONY
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.2/2-4.2:1.0/0003:04F2:0833.0004/input/input5
hid-generic 0003:04F2:0833.0004: input,hidraw3: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.7-4.2/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.2/2-4.2:1.1/0003:04F2:0833.0005/input/input6
hid-generic 0003:04F2:0833.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:1d.7-4.2/input1
scsi host6: ioc0: LSISAS1068E B2, FwRev=01210000h, Ports=1, MaxQ=277, IRQ=29
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c50017985679
scsi 6:0:0:0: Direct-Access SEAGATE ST914603SSUN146G 0868 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: [sda] 286739329 512-byte logical blocks: (147 GB/137 GiB)
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c500179874b1
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: df 00 10 08
sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 6:0:1:0: Direct-Access SEAGATE ST914603SSUN146G 0868 PQ: 0 ANSI: 5
sda: sda1 sda2 < sda5 >
sd 6:0:0:0: [sda] Attached SCSI disk
sd 6:0:1:0: Attached scsi generic sg1 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x5000cca0259f87a5
sd 6:0:1:0: [sdb] 286739329 512-byte logical blocks: (147 GB/137 GiB)
scsi 6:0:2:0: Direct-Access HITACHI H106030SDSUN300G A2B0 PQ: 0 ANSI: 6
sd 6:0:1:0: [sdb] Write Protect is off
sd 6:0:1:0: [sdb] Mode Sense: df 00 10 08
sd 6:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 6:0:1:0: [sdb] Attached SCSI disk
sd 6:0:2:0: Attached scsi generic sg2 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x5000cca03c041369
sd 6:0:2:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:2:0: [sdc] Write Protect is off
sd 6:0:2:0: [sdc] Mode Sense: e7 00 10 08
scsi 6:0:3:0: Direct-Access HITACHI H106030SDSUN300G A2B0 PQ: 0 ANSI: 6
sd 6:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 6:0:2:0: [sdc] Attached SCSI disk
sd 6:0:3:0: Attached scsi generic sg3 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 4, phy 4, sas_addr 0x5000cca03c58b011
sd 6:0:3:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:3:0: [sdd] Write Protect is off
sd 6:0:3:0: [sdd] Mode Sense: e7 00 10 08
sd 6:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
scsi 6:0:4:0: Direct-Access HITACHI H106030SDSUN300G A3D0 PQ: 0 ANSI: 6
sd 6:0:3:0: [sdd] Attached SCSI disk
sd 6:0:4:0: Attached scsi generic sg4 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 5, phy 5, sas_addr 0x5000cca03c5cc9c9
sd 6:0:4:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:4:0: [sde] Write Protect is off
sd 6:0:4:0: [sde] Mode Sense: e7 00 10 08
scsi 6:0:5:0: Direct-Access HITACHI H106030SDSUN300G A3D0 PQ: 0 ANSI: 6
sd 6:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 6:0:5:0: Attached scsi generic sg5 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x5000cca03c5c3c81
sd 6:0:5:0: [sdf] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:5:0: [sdf] Write Protect is off
sd 6:0:5:0: [sdf] Mode Sense: e7 00 10 08
sd 6:0:5:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 6:0:6:0: Direct-Access HITACHI H106030SDSUN300G A3D0 PQ: 0 ANSI: 6
sd 6:0:4:0: [sde] Attached SCSI disk
sd 6:0:6:0: Attached scsi generic sg6 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 7, phy 7, sas_addr 0x5000cca03c7173bd
sd 6:0:6:0: [sdg] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:6:0: [sdg] Write Protect is off
sd 6:0:6:0: [sdg] Mode Sense: e7 00 10 08
scsi 6:0:7:0: Direct-Access HITACHI H106030SDSUN300G A3D0 PQ: 0 ANSI: 6
sd 6:0:6:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 6:0:5:0: [sdf] Attached SCSI disk
sd 6:0:7:0: Attached scsi generic sg7 type 0
sd 6:0:7:0: [sdh] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:7:0: [sdh] Write Protect is off
sd 6:0:7:0: [sdh] Mode Sense: e7 00 10 08
sd 6:0:7:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 6:0:6:0: [sdg] Attached SCSI disk
sd 6:0:7:0: [sdh] Attached SCSI disk
random: crng init done
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Encrypted Volumes.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[393]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
ipmi device interface
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 4 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 4 irq 0
ipmi_si: SMBIOS-specified kcs state machine: duplicate
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 4 spacing 4 irq 0
ipmi_si: SPMI-specified kcs state machine: duplicate
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
ioatdma: Intel(R) QuickData Technology Driver 4.00
igb 0000:01:00.0: DCA enabled
igb 0000:01:00.1: DCA enabled
igb 0000:07:00.0: DCA enabled
igb 0000:07:00.1: DCA enabled
EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:fe:03.0 (INTERRUPT)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
raid6: sse2x1 gen() 5393 MB/s
raid6: sse2x1 xor() 4823 MB/s
raid6: sse2x2 gen() 6228 MB/s
raid6: sse2x2 xor() 6146 MB/s
raid6: sse2x4 gen() 9030 MB/s
audit: type=1400 audit(1503437116.422:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=743 comm="apparmor_parser"
audit: type=1400 audit(1503437116.422:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=743 comm="apparmor_parser"
audit: type=1400 audit(1503437116.426:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=744 comm="apparmor_parser"
audit: type=1400 audit(1503437116.426:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1503437116.426:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=746 comm="apparmor_parser"
audit: type=1400 audit(1503437116.426:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=739 comm="apparmor_parser"
audit: type=1400 audit(1503437116.426:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=739 comm="apparmor_parser"
audit: type=1400 audit(1503437116.426:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=739 comm="apparmor_parser"
audit: type=1400 audit(1503437116.426:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=739 comm="apparmor_parser"
audit: type=1400 audit(1503437116.426:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=745 comm="apparmor_parser"
raid6: sse2x4 xor() 6704 MB/s
raid6: using algorithm sse2x4 gen() 9030 MB/s
raid6: .... xor() 6704 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 11804.000 MB/sec
generic_sse: 10690.000 MB/sec
xor: using function: prefetch64-sse (11804.000 MB/sec)
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
gpio_ich: GPIO from 451 to 511 on gpio_ich
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid dfab0076-843d-4169-b269-75440db941ff devid 3 transid 6 /dev/sde
BTRFS: device fsid dfab0076-843d-4169-b269-75440db941ff devid 5 transid 6 /dev/sdg
BTRFS: device fsid dfab0076-843d-4169-b269-75440db941ff devid 6 transid 6 /dev/sdh
BTRFS: device fsid dfab0076-843d-4169-b269-75440db941ff devid 4 transid 6 /dev/sdf
BTRFS: device fsid dfab0076-843d-4169-b269-75440db941ff devid 2 transid 6 /dev/sdd
BTRFS: device fsid 37037f03-0699-43ef-a72d-9641e4f9a46a devid 1 transid 6 /dev/sdb
ipmi_si IPI0001:00: Found new BMC (man_id: 0x00002a, prod_id: 0x4701, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
Adding 37738492k swap on /dev/sda5. Priority:-1 extents:1 across:37738492k FS
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
ftdi_sio 8-1:1.0: FTDI USB Serial Device converter detected
usb 8-1: Detected FT232RL
usb 8-1: FTDI USB Serial Device converter now attached to ttyUSB0
IPv6: ADDRCONF(NETDEV_UP): enp7s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp7s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp7s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp7s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp1s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp1s0f0: link is not ready
igb 0000:01:00.0 enp1s0f0: igb: enp1s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f0: link becomes ready
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3129 > 3128), lowering kernel.perf_event_max_sample_rate to 63750
perf: interrupt took too long (3940 > 3911), lowering kernel.perf_event_max_sample_rate to 50750
perf: interrupt took too long (4929 > 4925), lowering kernel.perf_event_max_sample_rate to 40500
CPU9: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature/speed normal
CPU9: Core temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 3741)
CPU9: Core temperature above threshold, cpu clock throttled (total events = 3741)
mce_notify_irq: 1 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature/speed normal
CPU9: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU9: Core temperature above threshold, cpu clock throttled (total events = 6808)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 6808)
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
CPU9: Core temperature/speed normal
CPU1: Core temperature/speed normal
perf: interrupt took too long (6255 > 6161), lowering kernel.perf_event_max_sample_rate to 31750
CPU13: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 1)
mce_notify_irq: 1 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
CPU5: Core temperature/speed normal
CPU13: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
perf: interrupt took too long (7824 > 7818), lowering kernel.perf_event_max_sample_rate to 25500
CPU9: Core temperature above threshold, cpu clock throttled (total events = 16967)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 16967)
CPU1: Core temperature/speed normal
CPU9: Core temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 20171)
CPU9: Core temperature above threshold, cpu clock throttled (total events = 20171)
mce_notify_irq: 2 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
CPU9: Core temperature/speed normal
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU13: Core temperature above threshold, cpu clock throttled (total events = 3944)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 3944)
CPU13: Core temperature/speed normal
CPU5: Core temperature/speed normal
perf: interrupt took too long (9782 > 9780), lowering kernel.perf_event_max_sample_rate to 20250
perf: interrupt took too long (12278 > 12227), lowering kernel.perf_event_max_sample_rate to 16250